Items: 0$0.00

ENERDRIVE EPOWER CHARGER 12V 40A 3BANK

Online Price:

$599.00

Instore Price: $679.00
Product Code: EN31240
Availability:  
Qty:
Information
Specifications

ENERDRIVE EPOWER FULLY AUTOMATIC BATTERY CHARGER 12V 40A 3 BANK

Features :

Multistage Charging : Fully automatic multistage 40A battery charger with the ability to charge 3 separate battery banks.
Separate Battery Banks : Isolated charging design where battery bank one is separate from battery bank two and three.
Programmable : Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
Current Control : User adjustable current output (e.g. Dial the 40amp unit back to run off a 1kVA generator).
Smart Charging : The ePOWER 20A battery charger will regulate its output based on the loads connected to your battery banks.
Wide AC Input Range : Operates on both 110V / 60Hz and 240V / 50Hz.
LED Display : Easy to use “set and select” menu along with scrolling charger status.
Silent Mode : Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
Temperature Sensor : Battery temperature sensor included with 3 meter cable.
2 Year Warranty from an Australian company renowned for customer support.

Its all about Lithium!!

The recent advances in high capacity Lithium battery technology have seen the need to develop a battery charger suited to their needs. With most traditional ‘smart’ chargers their suitability to Lithium batteries is limited. Lithium batteries require a constant current / constant voltage charge algorithm and are unique in that almost every amp-hour of charge delivered by the charger is accepted as one amp hour into the battery, hence the need to deliver a constant current as long as possible.
The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). The graph below shows the ePOWER charger algorithm perfectly supporting Lithium battery requirements

Weight : 3630gm
Shipping Costs ; https://www.allvolts.com.au/services_page.html

Model EN31240
Note: Specifications subject to change without notice.
CHARGER OUTPUT
Output Current (Maximum) 40A
OUTPUT VOLTAGE RANGE
Charge 14.2 – 15.5 V
Float 13.4 – 13.8 V
- Equalize 16.0 V
Charging Control Four stages (Bulk/Absorption/Float/Maintenance)
Two stages (Bulk/Absorption)
Constant Power Supply (Program setting)
Priority Battery Bank Charging
DC Output Bank Three (1 fully independent, 2 common with diode isolation)
Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Standby Current < 2 mA
CHARGER INPUT
AC Input Voltage (Nominal) 90 to 265 VAC
AC Input Operating Range 207-265 Vac (3.8 A Max) 90 – 125 Vac (7.7 A Max)
AC Input Frequency Range 47 – 63 Hz
Power Consumption 700W (Full Load)
Power Factor Correction Yes
Charger Efficiency > 82%
PROTECTION AND FEATURES
Reverse Polarity Yes, (with user replaceable fuse/s)
Over Charge Yes, unit shutdown
Over Temperature Yes, unit de-rated and shutdown
Output Short Circuit Yes, (with user replaceable fuse/s)
Cooling Forced air ventilation (thermo controlled fan)
Temperature Setting Hot, Normal, Cold (no sensor connected)
Battery Temp Sensor Port RJ12 (standard battery temp. sensor supplied)
DISPLAY
LCD Display (with back light) Charging status, Battery Voltage, Output Current & Fault Codes.
AC INPUT AND DC OUTPUT CONNECTION
AC Input Connection IEC with Supplied 1.2M Power Lead
DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread
DC Output Ground Single Heavy Duty Common Ground Stud
ENVIRONMENTAL AND OPERATING TEMPERATURE
Storage Range -40° to 70° C
Operating Range -20° to 60° C
Humidity 5-95%, relative humidity non-condensing
Ingress Protection IP32 (Basic drip proof in vertical orientation)
Base Unit Weight and Dimensions
Weight: (kg) 2.6
Dimension: (mm) L x W x H 295 x 206 x 86
Optional Accessories Remote Digital Display / Enerdrive Part Number EN3REM
Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations.